Ecoclave

Economic and Versatile

The Ecoclave is a more economical version of the BEP280 autoclave system.  It uses the same vessels up to 3 litres in both glass and stainless steel, but in a simpler configuration.

The vessels are stirred using the compact Cyclone magnetic drive, for efficient stirring to 3000 rpm.  The vessels sit in a stand with a sliding polycarbonate protective door.  This makes access to the vessels much easier than before, while still maintaining safety.

The Ecoclave is also available in a range of colours to match the decor of your lab!  Alternatively a stainless steel version is available
The range of Ecoclave systems

The range of Ecoclave systems

One System, Four Types of Vessel

Type 1 - Glass

Type 1 Vessel

  • Graduated cylindrical vessel with hemispherical bottom
  • Capacity range: 100ml to 1.6 litres
  • Max operating pressure: 12 bar
  • Glass heating jacket
  • Rated to 200o C
  • Version available with PTFE bottom outlet valve
  • Version available with evacuated outer jacket

Type 2 - Glass/Stainless Steel

Type 2 Vessel

  • Graduated cylinder with intermediate and bottom flanges
  • 3/8" BSP drain outlet in bottom
  • 12 bar operating pressure for 0.5 to 2 litre range
  • Glass heating jacket
  • Rated to 200o C
  • Also available in Hastelloy etc

Type 3 - Stainless Steel

Type 3 Vessel

  • Cylindrical vessel with hemispherical bottom
    3/8" BSP drain outlet in bottom
  • Standard vessel sizes and operating pressures:
  • 0.5 to 3 litres Max 60 bar
  • Welded on heating jacket
  • Rated to 250o C
  • Also available in Hastelloy etc
  • Other pressures and temperatures on request
     

Type 4 - Stainless Steel

Type 4 Vessel

  • Cylindrical vessel with hemispherical bottom and two large sight glasses 3/8" BSP drain outlet in bottom
  • Standard vessel sizes and operating pressures:
  • 0.5 to 3 litres Max 60 bar
  • Welded on heating jacket
  • Rated to 250o C
  • Also available in Hastelloy etc
  • Other pressures and temperatures on request

We also have a wide range of ancillary equipment, including heater/chiller packages,  gas control units and control systems.

We now have a leaflet giving some more detail on this equipment available to download in our download section.
Please contact us with questions or comments about this website.
© 2001-2006 Ken Kimble (Reactor Vessels) Ltd. All rights reserved. Ken Kimble (Reactor Vessels) Ltd., Unit 15, Bourne Enterprise Centre, Borough Green, Kent, UK  TN15 8DG. Tel: 01732 882791 Fax: 01732 885840