Transparent Heat Transfer Fluid for a Wide Range of Temperatures

We have a range of different oils suitable for different temperature ranges.  All are completely transparent to allow observation of reactions in glass vessels without any obstruction.

We use a silicone oil that remains below its flash point throughout the working temperature range.  Manufacturers of most heater/chillers recommend the use of heat transfer fluids above their flash points claiming that their safety systems make this safe, however in the case of a damaged flexible hose or vessel jacket, we believe that it is better not to have hot oil above its flash point being pumped around the lab.

• Ultra Low    -60^oC to +115^oC
• Low            -40^oC to +165^oC
• Medium      +25^oC to +225^oC
• High           +60^oC to +295^oC

Please contact us with questions or comments about this website.
© 2001-2006 Ken Kimble (Reactor Vessels) Ltd. All rights reserved. Ken Kimble (Reactor Vessels) Ltd., Unit 15, Bourne Enterprise Centre, Borough Green, Kent, UK  TN15 8DG. Tel: 01732 882791 Fax: 01732 885840